Luxman R-117

Some audio purists believe that quality audio died in the late 1970’s. However, the Luxman R-117 refutes this view. No, it doesn’t have a silver face. Yes, it was built in late 1980’s at the edge of what some might call the vintage era. But, at 160 watts per channel it is a monster receiver. Not only does it have power it has the features to make it arguably the best receiver Luxman ever made. Referred to in the advertising literature as the Ultimate Power Receiver it was theirs top of the line receiver and was made in Japan. It retailed for $1200 in 1987 but had dropped to close out pricing of $1000 by 1992.

With the advent of the compact disc era audio manufacturers had to adapt to the changing market. CD’s have a wider dynamic range than LP’s and a good amplifier needs to have ample reserve power to handle that range. Also, speaker manufacturers were beginning to build speakers with higher sonic performance that could expose amplifiers to very low impedance loads. Luxman used a dual rail designed power supply, massive, triple-shielded, high-energy power transformer, fast-recovery rectifier diodes and matched high-current, bipolar transistor pairs in the design that result in the R-117 being able to produce a staggering 700 dynamic watts per channel into 2 ohms. Impressive!

The display is fully digital.

What’s interesting about Luxman’s R-117 is that it had to accommodate a number of different audio sources. LP’s were still being played, as were cassettes, and CD’s were just becoming the rage at the time. So, the R-117 needed to handle all of these sources well. And it does.

Want to listen to the radio? The 5-gang varactor, dual-gate MOSFET FM front end, with automatic hi-blend circuitry will give you clean, distortion-free FM performance. The tuning section incorporates Luxman’s proprietary Star circuit pattern and Duo-Beta negative feedback circuitry as well.

Ready for some vinyl? The phono section can accommodate low-output moving-coil (MC) cartridges, as well as moving magnet (MM) cartridges. Notice that the R-117 even has a 3 position loudness control.

Perhaps a compact disc? The CD Straight circuitry routes CD input signals past all signal processor and switching functions to provide optimum accuracy, imaging and impact.

The R-117 can even handle up to three video sources, and professional-grade video amplifiers were incorporated to maintain a high-quality picture.

All of the major functionality can be handled from the RR-117 factory remote.

Specifications:

  • Tuning range: FM, AM (MW)
  • Power output: 160 watts per channel into 8 ohms (stereo)
  • Frequency response: 20Hz to 20kHz
  • Total harmonic distortion: 0.03%
  • Damping factor: 80
  • Input sensitivity: 0.22mV (MC), 2.5mV (MM), 150mV (line)
  • Signal to noise ratio: 70dB (MC), 88dB (MM), 100dB (line)
  • Speaker load impedance: 8ohms to 16ohms
  • Video Connections: composite
  • Dimensions: 438 x 139 x 424mm
  • Weight: 15.2kg
  • Accessories: RR-117 remote control

Some of the other capabilities of the R-117 are:

  • 20 AM/FM Random Access memories
  • Auto Seek Tuning
  • AM/FM memory Scan
  • Cable-ready Fm Fine-tuning
  • FM Muting
  • FM IF bandwidth switch
  • Multipath Detection Circuit and Indicator
  • CD Straight Switches
  • Tone Defeat Switch
  • MC/MM Cartridge Switches
  • Record-out Selector Switch
  • Three-position loudness Switch
  • Multi-function Remote Control
  • Unified Remote DIN Jacks
  • Unified Remote Serial Output jack
  • Remote Eye Connection (DIN)
  • Signal processor jack/Switch
  • 2 Pair Pre-out Jacks and 1 Pair Main-in Jacks
  • Speakers Terminals Accept Single Banana

In an early nod to the smart home concept, The R-117 can interconnect with an external remote eye to allow complete system operation from any room in your house. Install the required cables and accessories and virtually all functions of the main system can be controlled at each remote location.

Some bench tests back in the late 1980’s showed that the R-117 could reach up to 250 watts per channel before clipping. Given all of its technical prowess you might think the R-117 would have a sterile sound. But, the reality is that its circuitry is designed to provide a very clean but warm, tube like, sound. Debuting just before the A/V revolution it performs far better when listening to stereo than any later A/V receiver at most any price point.


The Luxman R-117 is one of the best receivers ever built. While it doesn’t have the stereotypical vintage audio look it is a classic and in high demand by audio enthusiasts. If you don’t mind the more modern look and have a chance to pick up a fully functional unit at a reasonable price then do it.

Right Now on eBay 
Clicking a link to eBay may result in a referral commission being paid if a purchase is made.
Loading…

19 thoughts on “Luxman R-117

  1. Stereo Rehab told me they won’t work on the R-117. After some further digging I found out Deltronics will Take them, as will Glenn Poor’s TV Service in Urbana.

  2. I picked one up from a “Buy Nothing” Facebook group, along with a matched analog surround sound decoder for the trouble of hauling it away. I didn’t know what it was, but needed a receiver to setup a system in my workshop. They thought it “needed a new fuse”, and it just needed jumpers from pre to main to replace the surround decoder loop. When I got it hooked up to a CD player it blew me away. Loads of volume at about half-way on the volume control, very very clean sound, no distortion at all. If you need to blow the windows out, this will get it done. It absolutely needs an antenna to pick up FM though. I still need to find a manual

  3. I have one in like new condition w/ the factory remote. Was the driving force in my parents custom built dream home in Clearwater, FL in 1989. Hooked up to a 12 channel speaker spreader this bad boy pumped in every room including the pool patio. Truly a BEAST!. Looking to sell it. Any thoughts on the best place or way to sell it?

    1. I’ve sold quite a few on Craigslist and Offerup. Ebay too, but then you have to deal with packing and shipping it. You can look up eBay “sold” items to get an idea of the current going price. HERE are the current solds.

    2. Hi Id be interested in buying the receiver. if its still available
      Feel free to reach out to me. My cell is 630-712-7188.
      Thanks, Mike

  4. It’s commonplace to denigrate Alpine’s acquisition of Luxman in the 1980s but I have four pieces of Luxman gear from this era, the R- 115 and the R-406 receivers, and the K-110 and K-405 cassettes decks, and they’re each among the very best pieces I happen to own. And compared to earlier or later Luxman gear, they’re all fairly affordable, and they all sound great.

  5. I have both a working R-117 (which I love with a pair of Mach Ones from RS), and an R-115 that I started fixing on a YouTube video. I’m still hunting a remote for the R-117, getting pretty hard to find them. I’m telling you now, these receivers pack a punch, at half volume into the Mach Ones, the sound is pure, well balanced, and rattling the windows.

    1. There is a good after market on for $39.99 on line , I bought one and it is very functional called Redo Remote

  6. I have a R-117 that I want checked out before I list it on ebay. Either the unit is so clear and precise in sound replication that it exposes the recording flaws in CDs and FM radio; or there’s something wrong with it.
    Anyone know of a good place to take it in the SF Bay Area – SF, Oakland, or San Jose.
    thanks.
    Frank

    1. Frank,
      I bought my R-117 back in the late 80s and still own it to this day. The first CD I listened to on it that was full digital was classical music and I could hear a piece of paper dropping and the orchestra turning their pages. It is that clear. They are monsters and sound great.

  7. I have pretty much every Luxman receiver of this era and have restored dozens more. The R1120 is beyond outstanding. The R10xx and R30xx series are great receivers as well. The R1xx series which was the first “Alpine” Luxman’s are buggers to work on, but when done properly are outstanding thoroughbreds with proper speakers. The R115 and R117 can drive even the most demanding low impedance speaker loads @ 0.03% THD.

  8. I waited for around 2 years to get my Luxman R-117 digital synthesized receiver from one of our best friends and I will tell you I have had a lot of stereos and this model seams to have the most punch out of the box of any, but I need a tone defeat switch and I can’t seem to find a new one anyway, anybody know where there is a place that has new ones in stock? Thank you very much George…

Leave a Reply to Brian Cancel reply

Comments are manually moderated and may not show up immediately after posting. As long as they are not spam they will show eventually. No need to repost.